Please use this identifier to cite or link to this item: http://localhost:8080/xmlui/handle/123456789/2580
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRanade, S.V.-
dc.contributor.authorKhan, Aaqueeb(14ME77)-
dc.contributor.authorSayed, Anas(14ME103)-
dc.contributor.authorSayed, Suhail(14ME104)-
dc.contributor.authorSayyad, Ammar(14ME105)-
dc.date.accessioned2018-08-09T03:00:31Z-
dc.date.available2018-08-09T03:00:31Z-
dc.date.issued2018-05-
dc.identifier.urihttp://www.aiktcdspace.org:8080/jspui/handle/123456789/2580-
dc.descriptionIn partial fulfillment for the award of the Degree Of BACHELOR OF ENGINEERING IN MECHANICAL ENGINEERING.en_US
dc.description.abstractThis project is designed to improve Electrical versus Thermal efficiency. Nowadays electrical heating system converts 65% of the electrical power into thermal power. We have introduced infrared penetration heating system to improve efficiency up to 95% thermal efficiency and 100% electrical efficiency. We are going to construct a oven model to improve our system. A real fabrication model is to analyze IR heating system. The capacity of infrared lamps used inside the oven will be about 500watts. IR lamps will be used to provide heat. From the OVEN, the temperature is sensed by the thermocouple, which is based on the principle of Seeback effect. The function of a thermocouple is to convert heat energy to mill voltage and it is fed to a signal conditioner to improve the sensitivity and also to improve the non-linear Property of thermocouple. Temperature acquired from the thermocouple is indicated on the screen of the computer. The computer will also compare the temperature acquired with the set temperature and control action if any will be done by the solid-state relay that avoids instantaneous heating. The infrared (IR) heating has the potential to be used for solution zing of metal forgings with benefits of reduced energy consumption, increased productivity, and improved microstructure and mechanical properties. In our project, we have integrated heat treatment, annealing, oven and oven operations are done in a single device. So that the cost of equipment for each process and time taken are reduced.en_US
dc.language.isoenen_US
dc.publisherAIKTCen_US
dc.relation.ispartofseriesAccession # PE0357;-
dc.subjectProject Report - MEen_US
dc.titleDesign and fabrication of infra red ovenen_US
dc.typeProject Reporten_US
Appears in Collections:Mechanical Engineering - Project Reports

Files in This Item:
File Description SizeFormat 
PE0357.pdf2.39 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.