dc.contributor.author |
Qureshi, Arshad |
|
dc.date.accessioned |
2016-08-13T05:17:42Z |
|
dc.date.available |
2016-08-13T05:17:42Z |
|
dc.date.issued |
2015-12 |
|
dc.identifier.citation |
Qureshi, A. (2015). Optimization of Cutting parameters for Surface roughness in CNC turning of P20 steel. International Journal of Scientific & Engineering Research, 6(12), 133-138. |
en_US |
dc.identifier.issn |
2229-5518 |
|
dc.identifier.uri |
http://www.aiktcdspace.org:8080/jspui/handle/123456789/1767 |
|
dc.description |
Key words: Optimization, Surface Roughness (Ra), Taguchi, Turning, P20 steel. |
en_US |
dc.description.abstract |
The surface roughness is one of the most commonly
used criteria to determine the quality of turned steel. The surface
roughness of a turned surface is an important response parameter.
The quality of product such as laptops, cell phones made by
injection moulding greatly depends on finishing of the moulds.
Surface roughness is one of the important factors for the materials
used for making moulds and dies such as P20 steel. This paper
optimize the cutting parameters such as feed rate, depth of cut and
cutting speed for the turning process of AISI P20 steel (mould steel)
for better surface finish. Taguchi’s technique has been used to
accomplish the objective of the experimental study. L-9 Orthogonal
array, Signal to noise (S/N) have been used for conducting the
experiments. |
en_US |
dc.language.iso |
en_US |
en_US |
dc.publisher |
International Journal of Scientific & Engineering Research |
en_US |
dc.relation.ispartofseries |
Volume 6;Issue 12 |
|
dc.subject |
Staff Publication - SoET |
en_US |
dc.subject |
Staff Publication - ME |
|
dc.title |
Optimization of Cutting parameters for Surface roughness in CNC turning of P20 steel |
en_US |
dc.type |
Article |
en_US |