dc.contributor.author |
Ansari, Zakir |
|
dc.contributor.author |
Idrisi, Mohd.Umar(13ME76) |
|
dc.contributor.author |
Kaka, Taher Ali(13ME77) |
|
dc.contributor.author |
Desai, Nitesh B.(14ME71) |
|
dc.contributor.author |
Yadav, Vipin(14ME123) |
|
dc.date.accessioned |
2018-08-09T04:28:43Z |
|
dc.date.available |
2018-08-09T04:28:43Z |
|
dc.date.issued |
2018-05 |
|
dc.identifier.uri |
http://www.aiktcdspace.org:8080/jspui/handle/123456789/2585 |
|
dc.description |
In partial fulfillment for the award of the Degree Of BACHELOR OF ENGINEERING IN MECHANICAL ENGINEERING. |
en_US |
dc.description.abstract |
This report aims to model, stimulate, and perform the static and dynamic analysis and fabrication of walking stimulator that help the person who doesn’t know how to walk. Modeling simulation are performed using modeling software i.e. SOLIDWORKS and analysis on SOLIDWORKS/ANSYS. The deflection is determined by performing static analysis and dynamic analysis.
As we have to customize this walking stimulator so it can use for those people who not able to walk. Strength and light weight is our basic consideration throughout the design of walking stimulator. Hence the proper material is selected for the design.
All the impact and stress were calculated by considering the walking condition and then design was analyses in the software. Step by step the modification in design we made as found necessary and analyses in software. After the complete analysis and the approval of design by inspecting it in the modes of failure the design was finalized and was selected to fabricate which will not fail in any extreme criteria of stresses or load induced. |
en_US |
dc.language.iso |
en |
en_US |
dc.publisher |
AIKTC |
en_US |
dc.relation.ispartofseries |
Accession # PE0367; |
|
dc.subject |
Project Report - ME |
en_US |
dc.title |
Mechanical walking simulator |
en_US |
dc.type |
Project Report |
en_US |