Recently added

Civil Engineering - Project Reports: Recent submissions

  • Affordable housing using lean construction 
    Jadhav, Umesh; Khan, Amir Husain (14CES12); Khan, Dawood Ibrahim (14CES16); Parkar, Fouzan (14CES35); Pavaskar, Amin (14CES37) (AIKTC, 2018-05)
    This project intends to compare the use of lean construction tool, Last Planner System, with traditional methods of construction in small scale construction project. Based on the success results obtained by lean production ...
  • Case study of hostel project 
    Parkar, Fauwaz; Harbe, Aaquib (12CE66); Shaikh, Arfaat (13CE48) (AIKTC, 2018-05)
    Hostels provide budget-oriented, cost-effective, sociable accommodation where guests can rent a bed, usually a bunk bed, in a dormitory and share a bathroom, lounge, and sometimes a kitchen. Hostels are often cheaper for ...
  • Research on mechanical properties of geo polymer concrete 
    Nadaf, Firoz; Shaikh, Maaz T (13Ce52); Murumkar, Nabil Y (14CE41); Pathan, Huzaif N (14CE46); Siddiqui, Fahad A (14CE59) (AIKTC, 2018-05)
    Increase in emission of carbon dioxide due to different industrial and non-industrial activities are causing a serious threat to environment. Cement being one of the major contributors in carbon dioxide emissions there is ...
  • Soil stabilization by using municipal solid waste ash 
    Jadhav, Umesh; Khan, Asif Hasib 14CES14; Belim, NavaidYakub 15DCES61; Khan, Mashrakain Ibnain 15DCES72; Siddiqui, Ashraf Mohammad Rafique 15DCES94 (AIKTC, 2018-05)
    This report presents the analysis of soil using municipal waste ash in soil stabilization for different engineering properties. As solid waste disposal being a major environmental problem, because of unavaiblity of lands ...
  • Experimental study of soil stabilization by using cement, lime and Potassium hydroxide 
    Patil, Dada S.; KHAN, ZISHAN MAHTAB ALAM (14CES24); JAMADAR, TALHA ZAHID (15DCES67); KAZI, MOHD ISMAIL ZAKI (15DCES69); MULLA, ABDULLATIF JABBAR (15DCES78) (AIKTC, 2018-05)
    The use of soil stabilization is ever increasing due to technical, economic and environmental benefits. Soil stabilization methods are commonly used in highway projects where high strength of sub-soil is required. In ...
  • Soil stabilization using polypropylene 
    Dasgupta, Rohan; Ansari, Kashif Ahmed (14CES04); Khan, Aqib (14CES13); Khan, Mohd Asif (14CES19); Khan, MohdShakir (14CES21) (AIKTC, 2018-05)
    Naturally found soil may or may not be strong enough to hold superstructures. For weak soil the method of soil stabilization is used to increase its strength. Consequently, randomly distributed fibre-reinforced soils ...
  • Soil stabilization by using micropile 
    Dasgupta, Rohan; Tuse, Aniket (14CE61); Abdullah, Zaid(14CE63); Mohd, Mahboob(15DCE65) (AIKTC, 2018-05)
    Micropiles have been primarily used as foundation support elements to resist static and dynamic loadings, and to a lesser extent, to provide reinforcements to the stabilization of slopes and excavations. Micropiles have ...
  • Seismic design for R.C.C building with irregulaties by using revised IS-1893:2016 
    Sarvade, Shivaji; MOHAMMAD, SHAHNAWAZ (15DCES77); SHAIKH, ABDUR REHMAN (15DCES83); SHAIKH, ABRAR AHMAD (15DCES84); SHAIKH x, SHAIKH MOHAMMAD ANAS (15DCES87) (AIKTC, 2018-05)
    India is a developing country with a variety of building practices and social and economic structure, which needs to evolve its own strategies for seismic hazard evaluation. The last decade has pointed to our shortcoming ...
  • optimization of shear wall for high rise buildings 
    Shaikh, Wasim; SHAIKH, TALHA (14CES46); KHAN, AYAZ (14CES18); KHAN, FAISAL (14CES28) (AIKTC, 2018-05)
    In the present construction industry, the buildings that are constructed are gaining significance in general, those with best possible outcomes with reference to optimal sizing and reinforcing of the structural elements ...
  • Production of biogas using food waste 
    Shabiimam, M A; Ansari, Zaid Akhtar (13CES10); Khan, Aaftab Aalam (13CES18); Khan, Salman (13CES25); Shaikh, Mohd Ajaz (14CES43) (AIKTC, 2018-05)
    As the world population is growing every year solid waste generation also increases. Every year around 1.2 billion tones of solid waste is generatedin which 60 to70% of waste is food waste which goes into landfill. The ...
  • Planning, designing, estimation and scheduling of AIKTC hostel building 
    Gawade, Prathamesh P.; Shaikh, Saquib I (14DCES73); Baqi, Tabish U (13CES60); Shaikh, Abdul Ahad (15DCES82); Sayed, Fahad(13CES45) (AIKTC, 2018-05)
    The following project deals with the planning, analysis, designing, quantity and cost estimation and scheduling of a 4-storey Hostel building using advance Civil Engineering softwares like AutoCAD, ETABS, Primavera P17 and ...
  • Improvement of soil by using bitumen emulsion 
    Dasgupta, Rohan; Siddique, Aaftab (15DCES58); Faquih, Rameez (15DCES65); Jamali, Mohd.Zahran (15DCES68); Shaikh, Arfan Mohd (15DCES86) (AIKTC, 2018-05)
    Soil is one of nature’s most abundant construction materials. Almost all type of constructions are built with or upon soil. If the sub-grade is not good enough, cracks may appear in the whole structure which may ultimately ...
  • Pavement evaluation and design of overlay 
    Kazi, Tehsin A.; Dayatar, Mohammad Sajid Aziz 15DCES66; Patel, Saqib MohdHanif 15DCES80; Qureshi, Mohd Subhan Mohd Miya 15DCES81 (AIKTC, 2018-05)
    In India, different types of pavement design have been observed. Most of the highways are having the flexible pavement. Pavement is designed to support the wheel load imposed on it from traffic moving over it. Additional ...
  • Parametric study of laterally supported and unsupported steel beam 
    Hawelikar, Shoukin Chandrakant; Khan, Mohd.Ismail (13CES22); Khan, Kamruddin S (14CES17); Khan, Saeed J (14CES23) (AIKTC, 2018-05)
    Steel as a building material has been used extensively in various type of structure some of the examples of civil engineering works in steel are high-rise building skeletons, industrial buildings, transmission tower, ...
  • Influence of accelerated curing on the compressive strength of concrete incorporating fly ash 
    Magar, Rajendra B.; Shaikh, Sohel (14CES45); Siddiqui, Shanwaz (14CES49); Cheulkar, Nihal (15DCES62); Choudhary, Danish(15DCES63) (AIKTC, 2018-05)
    Quality of concrete is an important factor in assimilating the strength of a structure. The factors that influence the quality of concrete more or less depend on the curing conditions. The type of curing used in this study ...
  • Improvement of soil by using bitumen emulsion 
    Dasgupta, Rohan; Siddique, Aaftab (15DCES58); Faquih, Rameez (15DCES65); Jamali, Mohd.Zahran (15DCES68); Shaikh, Arfan Mohd.(15DCES86) (AIKTC, 2018-05)
    Soil is one of nature’s most abundant construction materials. Almost all type of constructions are built with or upon soil. If the sub-grade is not good enough, cracks may appear in the whole structure which may ultimately ...
  • Disaster management using GIS tool for Panvel municipal corporation 
    Gawade, Prathamesh P.; Jilani, Naeem H (13CES34); Pathak, Suraj R (13CES36); Shaikh, Saeed Mohd (13CES55); Shaikh, Jawaad R (14DCES71) (AIKTC, 2018-05)
    Disaster preparedness and pre and post disaster management has always been a major concern for the urban area authorities worldwide. It involves collection, storage and efficient retrieval of a huge database integrated ...
  • Design of R.C.C structure using direct displacement based design 
    Sarvade, Shivaji; Ansari, Mohd Shadab (14CES06); Mohd, Irfan A (14CES29); Qureshi, Mohd Ayaz (14CES38); Siddiqui, Faizan A (14CES48) (AIKTC, 2018-05)
    In recent years, design emphasis is shifting from “Strength” to “Performance”. Structures designed with current seismic design codes and standards, should be able to satisfy specific performance level, defined as life ...
  • Comparative study on welded I beam and hot rolled steel beam 
    Hawelikar, Shoukin Chandrakant; Chaudary, Riyaz Ahmed (13CES14); Mohd, Ariz Ahmed Shakeel (13CES32); Qureshi, Fauwaz Javed (13CES40) (AIKTC, 2018-05)
    Steel, as a building, material, has been used extensively in various types of structures. Some of the examples of civil engineering works in steel are high-rise building skeletons, industrial buildings, transmission towers, ...
  • Comparative analysis of truss members according to design parameters of IS: 800:2007 and IS: 800:1984 
    Hawelikar, Shoukin Chandrakant; SHAIKH, TARANNUM RASHEED (13CES01); MANIYAR, SHIFA DAYIM. A (13CES03); ANSARI, MANAUVAR ALI K (14CES05); ANSARI, SHAHBAZ ALAM (14CES08) (AIKTC, 2018-05)
    The following will evaluate the study conducted on structural components ie. Tension member and compression member in both limit state method as well as working state method. The two methods have been compared in this study ...

Search Repository


Advanced Search

Browse

My Account