Browsing Mechanical Engineering - Project Reports by Issue Date

Browsing Mechanical Engineering - Project Reports by Issue Date

Sort by: Order: Results:

  • Design and analysis of all terrain vehicle 
    Momin, Zia; Shaikh, Rahil (11ME63); Mapari, Saad (12ME76); Shaikh, Mohd. Ijaz (11ME54) (AIKTC, 2015-05)
    Our project is to design and analyze the ATV that would help to automotive and transportation sector in India to flourish by introducing of low cost automation and effective design and usage of machinery. We have made an ...
  • Material optimization of gear and pinion for planetary gearbox 
    Ghazi, Altamash; Gupta, Deepak (11ME24); Phadatare, Kiran (11ME44); Pawale, Mustafa (11ME43); Shaikh, Abrar (11ME50) (AIKTC, 2015-05)
    Gears are the important element of a mechanical system, which are used for variation of speed and power, failure of even a single tooth of a gear will make the machine to stop. Hence our aim is to strengthen the gear which ...
  • Design, analysis and fabrication of a Go-Kart Chassis 
    Thavai, Rahul; Kazi, Shahezad Faisal (11ME28); Mirza, Shahrukh Ajaz(11ME37); Mukri, Hassien Arman(11ME39); Khan, Imran Jamil (11ME53) (AIKTC, 2015-05)
    This report aims to model, simulate, perform the static and dynamic analysis and fabrication of a go kart chassis consisting of Circular beams. Modeling , simulations are performed using modeling software i.e. SOLIDWORKS ...
  • Design of an automated assembely stand for assembly-disassembly of aircraft wheel 
    Rizvi, Zoya; Ansari, Armaan (11ME08); Dabir, Altamash (12ME82); Khan, Sufiyan (11ME33); Shaikh, Ijaz (11ME54) (AIKTC, 2015-05)
    As No. of Airlines has been formed, Competitiveness has been increased. All these Airlines use some of the methods for assembling the wheel of the Aircraft. This Assembly requires manpower and Human effort to a larger ...
  • Modelling and simulation of stepper feeder mechanism for punch press 
    Shaikh, Rizwan; Sarfraz, Ahmed (11ME06); Gaonkar, Rajesh (11ME22); Shaikh, Maaz (11ME56); Ayub, Mohammed Ishaque (11ME13) (AIKTC, 2015-05)
    A common method of feeding the stock material into the press is bypassing it through a pair of feed rollers which apply friction to the material and rotate in a cooperative manner to feed the stock in to the punch press. ...
  • Anti-drag system 
    Patwegar, Imamdin; Pawaskar, Azharuddin (12ME66); Bade, Usama (12ME77); Sirkhot, Waris (12ME68); Dilwarkhan, Sufiyan (12ME71); Ansari, Sadique (12ME72) (AIKTC, 2015-05)
    Important features  Two were used in conjunction with two hubs.  The locks have one flat face & one curved face.  The mechanism enables the vehicle to move in forward direction simultaneously prevents reverse slips ...
  • Implementation on 5S 
    Shaikh, Saad; Ansari, Noor (11ME11); Sawant, Ishtiyak (11ME47); Sayyed, Ziaul (11ME49); Khan, Naseem (11ME31) (AIKTC, 2015-05)
    Small scale industries plays an important role in Indian economic. It has emerged as powerful tool in providing relatively larger employment next to agriculture. It contributes more than 50% of the industrial production ...
  • Design and development of drive and steering mechanism of an automated guided vehicle (AGV) 
    Momin, Zia; Bhosale, Prasad (11ME45); Chavan, Manoj (11ME18); Dubey, Devang (11ME19); Koli, Aniket (11ME34) (AIKTC, 2015-05)
    Autonomous Guided Vehicle or AGV is one of material handling equipment that has been widely used in most manufacturing industry today as it provides more flexibility to the systems. The basic concept of the AGV incorporates ...
  • Automatic seat belt 
    Momin, Zia; Khan, Shaibaz Ahmed (11ME32); shaikh, Faiyaz Alam (11ME51); shaikh, Javed Akhtar (11ME52); Khan, Uzair Ahmed (12ME67) (AIKTC, 2015-05)
    Motor vehicle accidents have grown to be a major cause of death and injuries. We are developed occupant safety feature with an intension to reduce accidental injuries to occupants. After studying number of design plans and ...
  • Automation of material handling system 
    Gandhi, Asif; Farooqui, Saad (11ME21); Pachapure, Zaid (11ME40); Rawoot, Mudassir (11ME46); Wangde, Nawaz (11ME61); Ansari, Zakir (AIKTC, 2015-05)
    In today‟s competitive era, every firm wants to automate their production line to improve and to stand in the global market. Manual material handling in re-rolling mills is a very risky process and hence to promote worker ...
  • Optimization of plant layout 
    Gandhi, Asif; Khan, Asif (11ME27); Kutiyanawala, Hatim (11ME35); Mistry, Mohammed (11ME38); Parkar, Saalim (11ME41); Ansari, Zakir (AIKTC, 2015-05)
    The objective of this project is to study plant layout of Pratap Re-Rollers and based on the systematic layout planning method, design a new layout for increased productivity and reduction in material handling. The detailed ...
  • Design and development of an indoor airship 
    Motiwala, Nawaz; Shaikh, Faisal (12ME70); Sayyed, Mufeed (12ME69); Javed, Abdul (12ME64); Arfat, Ziyauddin (12ME83) (AIKTC, 2015-05)
    This research work aims at designing, development and fabrication of a remotely controlled indoor airship (gondola part) that could be used for camera surveillance, security and also can be used in opening ceremony to ...
  • Design and development of an indoor airship 
    Motiwala, Nawaz; Izhar, Ahmed (11ME26); Ansari, Kaushar (11ME09); Khan, Haroon (11ME62); Haider, Kazmi (11ME25) (AIKTC, 2015-05)
    This project is to design and fabricate the envelope for an indoor airship, paper includes the brief idea about selection of suitable material, deciding and estimating shape and volume of the envelope for an indoor airship ...
  • Design and development of an indoor airship 
    Motiwala, Nawaz; Ghogale, Advit (11ME23); Shaikh, Aisha (11ME02); Shaikh, Shahrukh (12ME65); Syed, Mujtaba (12ME80) (AIKTC, 2015-05)
    Tail fins are basically needed for providing stability and achieving manoeuvrability. The present investigation deals in finding alternatives for the ways the fin will be mounted on airship to facilitate on site attachment. ...
  • Design and fabrication of semi-automatic system for welding hydraulic cylinder 
    Kazi, Javed (2015-05)
    In this era of automation technology, industries have put a very high demand on fast and reliable methods. Hydraulic system is one of the latest technologies in industrial field. Hydraulic cylinder is an important part of ...
  • Instantaneous tyre pumping system & design and sress analysis of rear axle of Go-Kart 
    Meshram , Atul; Pathan , Naeem (11ME42); Khan , Azim (11ME36); Mir , Yadgar Ali (11ME36); Sayed , Idris (11ME48) (AIKTC, 2015-05)
    We have designed this project keeping in mind the current needs of the automobile industry. This industry has been evolving many technologies in the past and foresees further advancements in the coming years. The title of ...
  • Design of horizontal pressure vessel 
    Nafe, Momin (AIKTC, 2015-05)
    Pressure vessels are one of the most important equipment in the engineering world. Vessels are used in everyday life and on a very large scale. From a simple gas cylinder to huge distillation towers the world is full of ...
  • Design and fabrication of 3 in 1 transforming wheelchair 
    Meshram, Atul; Yadav, Rohit (12ME69); Khan, Maksud (12ME29); Gupta, Shyamsunder (12ME14); Khan, Javed (12ME28) (AIKTC, 2016-05)
    It is inevitable for any country to have people with disabilities, especially arthritis patients. The most commonly used devices for disabled people are wheelchairs. What’s more, the life quality of disabled people and ...
  • Design and fabrication of elliptical bicycle for cost optimization 
    Shaikh, Saad; Shaikhnag, Yasser (12ME59); Surangiwala, Mohd. Hawwaad (12ME61); Shaikh, Falak (12ME02); Khan, Saniya (12ME01) (AIKTC, 2016-05)
    ElliptiMove is a tool used in training by fitness enthusiasts and athletes to improve their performance with an innovative engineering concept that combines the motion of running, bicycling and elliptical machine. ...
  • Design of HVAC system for basement of AIKTC 
    Ghazi, Altamash; Ansari, Rizwan Ahmed Iqbal Husain (13ME126); Mukadam, Awez Yaseen (13ME132); Shaikh, Rubel Mohammed Amin (12ME56) (AIKTC, 2016-05)
    HVAC (Heating, Ventilation and Air conditioning) is technology of indoor and vehicular comfort. Its goal is to provide thermal comfort and acceptable indoor quantity of air. This project is to design a HVAC system for ...

Search Repository


Advanced Search

Browse

My Account