Recently added

Mechanical Engineering - Project Reports: Recent submissions

  • Project report on “workplace safety using AI & ML 
    Shah, Ubaid; Shekasan, Owais A. (19DME20); Attar, Amaan D. (19DME02); Gharade, A. Rahim A. R. (19DME06); Khan, Israr A. (19DME12) (AIKTC, 2022-05)
    Artificial intelligence and machine learning models are mathematical algorithms trained using specific data and human expert input to replicate a decision, which would be made by a human when provided with that same ...
  • Windows evaporative cooler 
    Momin, Zia; Khan, Lukman (18ME61); Momin, Tauheed (18ME64); Sayyed, Shadab (18ME85); Sayed, Salman (17ME71) (AIKTC, 2022-05)
    Window evaporative cooler is an efficient and effective solution for conditioning a confined space or area where many aspects of air-conditioning are taken into consideration also keeping the cost budget friendly and ...
  • Design and fabrication of stair climber trolley 
    Jamadar, Afaqahmed; Sayed, Abdul Samad Shahabuddin (18ME81); Surve, Mohammad Danish Akbar (18ME113); Shaikh, Hussain Ahmed Riyaz (18ME94); Shaikh, Izhar M Arif () (AIKTC, 2022-05)
    This project aims at developing a mechanism for easy transportation of heavy loads over stairs. The need for such a system arises from day-to-day requirements in our society. Devices such as hand trolleys are used to relieve ...
  • Project report on “voice actuated folding table" 
    Momin, Zia; Nazir, Abdulla Abdul Majid (19DME01); Hatodkar, Adina A.R (19DME07); Khan, Md. Siddiq Naeem (19DME13); Khan, Md. Ibrahim Firoz (19DME14) (AIKTC, 2022-05)
    Space-saving furniture design is prevalent in our daily lives and businesses, taking into consideration that the average living space of people in the world’s major cities is shrinking. Amidst the rising cost of living, ...
  • Design & fabrication of punch & die for sheet metal pressing 
    Kazi, Javed; Katkar, Abhishek S. (18ME30); Khan, Yusuf P. (18ME45); Malik, Farid Ahmed A. (18ME49); Khan, Mohd Salman (18ME53) (AIKTC, 2022-05)
    An electric wire cutting machine is a technology dealing with the application of mechatronics, and computers to produce goods and services. Automation is broadly classified into manufacturing automation, and services ...
  • Study of solar power charging station 
    Motiwala, Nawaz; Patel, Mohammad Anas Mohammad Zuber (17ME65); Pardeshi, Faizan Bashir (17ME62); Rajadurai, Peterraj (17ME70); Sanadi, Arfat Salim (19DME24) (AIKTC, 2022-05)
    A solar powered charging station is designed so that devices can be charged outdoors and in an environmentally friendly way. This system converts solar energy to electricity and stores it in a battery bank.The primary ...
  • Design of solar power charging station 
    Momin, Nafe; Kutty, Rishabh (17ME73); Shaikh, Saad (16ME76); Toya, Mohammed Saqlain (17ME101); Shaikh, Muqtasid (17ME94) (AIKTC, 2022-05)
    A solar powered charging station is designed so that devices can be charged outdoors and in an environmentally friendly way. This system converts solar energy to electricity and stores it in a battery bank.The primary ...
  • Re-engineering existing plastic product with biodegradable material 
    Karve, Amruta; Ansari, Asif Raza Md Mehmood Alam (18ME05); Ansari, Salman Salahuddin (18ME10); Khan, Ahmad Iftekhar Ahmad (18ME35); Thanwal, Adna Mujaheed (18ME57) (AIKTC, 2022-05)
    The Toothbrush has been an integral part of a daily routine across many cultures around the world in the 21st century. Numerous types of toothbrushes have been developed over time. A toothbrush is used to clean the teeth, ...
  • Design and manufacturing of portable, compact and efficient hydrogen reactor 
    Gandhi, Asif; Khan, Aftab Alam Shoaib (18ME34); Khan, Mujib Jumma (18ME39); Khodekar, Salman Abdus Salam (18ME46); Saurabh, Shreepati Dubey (18ME55) (AIKTC, 2022-05)
    Hydrogen reactors (also called hydrogen electrolysers) available today are mostly focused on the large-scale industrial level production of hydrogen requiring huge capital expenditure to setup and operate also the skilled ...
  • Design and fabrication of automated drain sewage cleaning machine 
    Ghazi, Altamash; Khan, Danish Nadeem Zahiruddin (18ME36); Iraqi, Mohammed Mubashir Quiser Zaki (18ME27); Chaudhary, Mohammed Zaid Haider Ali (18ME15); Choudhary, Naseem Ahmed Hayatullah (18ME18) (AIKTC, 2022-05)
    Today’s world is moving towards greener and cleaner environment. But for achieving this milestone humans need to control pollution which is increasing day by day in our surrounding and making our environment bad impacted ...
  • Plastic molding die design of aluminum profile cover {end cap} 
    Shah, Ubaid; Khan, Abdul Rahim Mohd Subhan (19DME10); Khan, Tabish Rashid (19DME18); Chaudhary, Salman M. Isa (19DME04); Sayed, Zohaib Didar Ahmed (17ME82) (AIKTC, 2022-05)
    Injection molding technology has been in development for almost 150 years. Injection molding is a molding technology that melts the material with the aid of a screw and an external heating device and then injects it into ...
  • Plastic injection mould design 
    Jawed, Mohammad; Ansari, Shoeb Akhtar Mohd Saban (19DME03); Khan, Muaoviz Ahmed (19DME15); Sarang, Anas Shakil (19DME25); Shaikh, Khalid Mehtab Alam (18ME97) (AIKTC, 2022-05)
    Everyone knows the importance of using plastic material product. It is economical, recyclable and easily available in the market. Use of metal material leads to increase the cost, weight and transportation. Therefore we ...
  • Hybrid solar dryer for manufacturing of resins 
    Jamadar, Afaqahmed; Ansari, Abdurrahman (17ME03); Choudhary, Mohd Varis (17ME13); Shaikh, Ahmed (17ME37); Ansari, Mo Istiyak (17ME54); Niazi, Tausif (17ME60) (AIKTC, 2022-05)
    Solar Drying Technology is used since years in different parts of the world. Depending upon the weather conditions there is variation in use of the solar dryers. For Example in countries/ regions where there are winter ...
  • Design and construction of feul theft detection system in automobile 
    Gandhi, Asif; Kazi, Mohammed Saad Mushtaque Ahmed (18ME31)); Farooqui, Mohammed Faisal Mohibullah (18ME23); Ansari, Aftab Alam Faiz Mohammad (18ME03) (AIKTC, 2022-05)
    Now a day's all world become digital so that we can easily deal with real time system. At same time digital fuel meter which is implemented in recent vehicle system has drawback that is actual fuel present in fuel tank of ...
  • Design and fabrication of cnc plasma cutting machine 
    Shaikh, Saad; Majgaonkar, Adnan (19DME19); Dakhani, Arsalan (19DME05); Pawaskar, Jibran (19DME22); Khan, Raza (19DME16) (AIKTC, 2022-05)
    With high speed of technology development, Plasma CNC machine plays an important role in industry, as it can cut any metal using only compressed air ignited at high voltage and high frequency. The cut is fast, clean and ...
  • Improvisation of zip cutting machine 
    Ansari, Zakir; Yadav, Ashish Shivkumar (18ME117); Siddiqui, Naushad Shamshad (18ME110); Shah, Kaide Azam Izharul Haque (18ME86); Shahriyar, Hussain Mohd Israil (18ME88) (AIKTC, 2022-05)
    With the daily use of the traditional zip cutting machine we got an idea to make it automated. Earlier using the machine required a great humaneffort,manpower, time and there was also a high risk of accidents while using ...
  • Design and analysis of floating head heat exchanger 
    Meshram, Atul; Rungla, Shaad Navid (19DME23); Khan, Fauwaz Afzal (19DME11); Khan, Safwan Moazzam (19DME17); Khan, Nisar Ahmed Aijaz Ahmed (18ME40) (AIKTC, 2022-05)
    The oil and gas field deals with various processes such as refining, chemical mixings and blending, liquefaction, purification, storage of fluids and chemicals under stipulated pressure and temperature requires boilers, ...
  • Design and analysis of hybrid vertical axis wind turbine with upstream wind deflectors 
    Shaikh, Rizwan; Tamhane, Tushar (18ME116); Sagale, Kunal (18ME77); Sayyed, Asgar (18ME84); Patil, Harshal (18ME60) (AIKTC, 2022-05)
    India is currently facing energy crisis with its major dependency on coal, crude oil imports to meet sharply growing energy needs of producing energy by renewable sources .the compound annual growth rate for wind generation ...
  • Development and analysis of advanced engineering material for thermal management in the vehicle cabin 
    Motiwala, Nawaz; Patel, Bilal Shahadat (19DME21); Kazi, Amaan Bashir (19DME09); Shaikh, Mohammad Ali Mohammad Mushtaque (19DME27); Nerekar, Kaashif Zaahid (18ME69) (AIKTC, 2022-05)
    In the context of present day, the unpleasant environment in vehicle cabin due to heated trapped air after parking the car in an open sun is the major challenge in this automotive world. It is very important that the cabin ...
  • Design and analysis of magneto-rheological damper system for general purpose 
    Khan, Yusuf; Bharambe, Rushikesh Vasant (18ME13); Jasnaik, Dawood Rafique (18ME19); Kalikhan, Priyansh Rajesh (18ME29); Kewal, Dhananjay Navnath (18ME32) (AIKTC, 2022-05)
    A semi- active control based on the magneto rheological (MR) damper is presented. The system includes four key parts: a rack and pinion mechanism, linear permanent magnet DC generator, a current adjustment MR damper, and ...

Search Repository


Advanced Search

Browse

My Account