Recently added

Mechanical Engineering - Project Reports: Recent submissions

  • Design and analysis of heat exchanger trolley to cool the radar system of fighter jet Sukhoi-30 
    Meshram, Atul N; Shaikh, Riyaz [15ME49]; Lalchadi, Akram [15ME25]; Dudhane, Pratiksha [15ME01]; Khan, Sajiya [15ME02] (AIKTC, 2019-05)
    An air cooler is used for efficient heat transfer from one particular medium to another medium. For separation of media, a solid wall is used so that they never mix, or they may be in direct contact. A cross flow heat ...
  • Motorised screw jack 
    Momin, Mohammad Nafe; Gupta, Rajesh [14ME15]; Ansari, Rizwan [14ME05]; Khan, Sharukh [ Khan, Sharukh]; Ansari, Waqar [12ME12] (AIKTC, 2018-05)
    Mechanical toggle Jack is widely used in the most automobile maintenance. Mechanical toggle jacks are available from the standard range in capacities from 5kN to1000kN (Metric) and 0.25 – 250 tons (imperial). Standard ...
  • Optimization of plant layout & implementation of 5S 
    Thavai, Rahul; Purkar, Talha [15DME135]; Memon, Saddam [15DME134]; Mirza, Abdul Rahim [15DME150]; Ziyaur Raheman, [15DME136] (AIKTC, 2018-05)
    The objective of this thesis is to improve the production floor layout of a manufacturing firm using systematic layout planning (SLP) and implement 5s. This project is conducted at NEXA PVT. LTD. MUMBAI various Aviation ...
  • Minimization of defects in aluminium alloy casting using GDC 
    Meshram, Atul N; Bepari, Farhan [14ME09]; Kanchwala, Mustafa [14ME17]; Kerawala, Rizwan [14ME18] (AIKTC, 2018-05)
    In the present world with the increasing use of Aluminium alloy wheels in automotive industry the Aluminium foundry industry had to focus on the quality of the products. The quality of a foundry industry can be increased ...
  • Vapour absorption refrigeration system 
    Khan, Md. Sirazuddin; Ansari, Abdul Raheem [13ME08]; Khan, Ziaur Rehman [13ME24]; Mogal, Aas Mohd [13ME28]; Sayyed, Faisal [13ME42] (AIKTC, 2017-05)
    The improvement in the quality of life has increased the demand for Refrigeration systems throughout the world. The use of high-grade energy for the operation of these systems is associated with Green House Gas emissions ...
  • Aprangements of centrifugal pumps in series and parellel 
    Hirani, Aslam; Yadav, Deepak [13ME124]; Yadav, Rahul [13ME125]; Shaikh, Moosin [13ME117]; Shaikh, Said [13ME1190] (AIKTC, 2017-05)
    Wetakeanopportunitytopresentthisprojectreporton “ARRANGEMENTSOFCENTRIFUGALPUMPSINSERIESANDPARELLEL”andput beforereaderssomeusefulinformation regardingourproject. Wehavemadesincereattemptsandtakeneverycaretopresentthismatterin ...
  • Process planning of aerospace components at Dabir industries 
    Gandhi, Asif; Mulla, Mohammed Rehan Aziz ( 16DME163); Shaikh, Watique ( 16DME179); Sandhi, Taha ( 16DME167); Mullaji, Daniyal ( 16DME164) (AIKTC, 2019-05)
    Our project is solely focused towards the processes that are employed when it comes to the manufacturing of the components in any industry. The sequence that has to be followed that leads to the transformation of raw ...
  • Design of automatic car parking system 
    Gandhi, Asif; Singh, Sushil ( 15ME117); Mohammed, Hussain ( 13ME43); Siddiqui, Arfat ( 15ME114) (AIKTC, 2019-05)
    Lack of space availability has always been a problem in urban areas and major cities and to add to it there are cars parked callously on the streets that further limit the space. In order to handle the issue of parking ...
  • Design and fabrication of three roll bending machine 
    Meshram, Atul; Siddiqui, Anas ( 13ME58); Ansari, Ezaz ( 16DME123); Khan, Salman ( 16DME151); Khan, Arman ( 16DME146) (AIKTC, 2019-05)
    In present time, the motorized 3 roll bending machine is universal forming equipment for sheet plate into cylinder and curved sheet. It is widely used boiler, shipbuilding, petroleum, chemical, metal structure and machinery ...
  • Refurbishment of 3D printer and parameter optimization 
    Motiwala, Nawaz; Sayyed, Hanifa ( 13ME64); Idrisi, Iqbal Ahmed ( 14ME75); Khan, Shadab ( 14ME86) (AIKTC, 2019-05)
    This abstract describes the project based on 3-D printing technology. The project was carried out with the fabrication of the 3-D printer. A 3-D printer is a machine which uses additive manufacturing process to create a ...
  • Increasing the productivity of impeller blade embossing through automation 
    Motiwala, Nawaz; Ansari, Noman [16DME126]; Kamil, Md. Yahya [16DME141]; Kazi, Arfat [16DME142]; Khan, Adnan [16DME145] (AIKTC, 2019-05)
    The following work is an experimental study towards finding methods to increase the productivity of conventional processes with minimum additional arrangements. The problem taken for this specific project is all about the ...
  • Implementation of 5S and spl at Hitesh Mechanical Pvt. Ltd. 
    Ghazi, Altamash; Shaikh, Md. Aftab [15ME102]; Khan, Abdurrasheed [15ME80]; Baranwal, Prince [15ME66]; Ansari, Usama [15ME64] (AIKTC, 2019-05)
    The objective of this thesis is to improve the facility layout of manufacturing firm using Systematic Plant Layout (SPL) or Systematic Layout Planning (SLP) and implementation of 5S. This project is conducted at HITESH ...
  • Design and automation of crimping machine for jato nozzle 
    Ghazi, Altamash; Faruqui, Mohammad Sameer [15ME09]; Lad, Alpesh Chandrakant [15ME24]; Khan, Maruf EbneSaud [15ME19]; Khan, Ayyub Nanneh [15ME15] (AIKTC, 2019-05)
    Press working is the probably the earliest occupation known to mankind. Native metals have been formed technological and shaped 7000 years ago. Press working industry utilize million on man, production tool, forming ...
  • Design and fabrication of Arduino based farm-bot for precision farming 
    Momin, Mohammad Nafe; Ansari, Ashar Mohd. Irshad [16DME122]; Kadam, Abhijit Balasaheb [16DME140]; Choughule, Omkar Preetam [16DME135]; Bhikan, Umer Salim [16DME133] (AIKTC, 2019-05)
    Looking towards the current scenario of our food production system, one can say how broken it is. As a result we are destroying our health as well as our environment. For that we came up with a new paradigm of precision ...
  • Actual indicator diagram mechanism 
    Shah, Ubaid (AIKTC, 2019-05)
    The main aim of this project is to understand the mechanism of actual indicator diagram and its working principle. Furthermore to design and fabricate a low cost mechanical indicator prototype with the help of available ...
  • Biogas from kitchen waste 
    Shah, Ubaid; Shaikh, Usama [15ME52]; Sheikh, Md. Jaffar [15ME60]; Thakur, Viraj [15ME60]; Yadav, Nitesh [15ME61] (AIKTC, 2019-05)
    India’s economic growth is contributing to a massive increase in the generation of solid waste. Approximately 55 million tones of Municipal Solid Waste is generated annually by urban areas in India. Over 59 % of homes ...
  • Water absorption characteristics of natural fibre reinforced polymer composite for various pretreatments of natural fibre 
    Ansari, Zakir; Momin, Osama [15ME31]; Sakarkar, Mansoor [15ME27]; Shaikh, Siraj [15ME51]; Tungekar, Md. Yoosha [14ME58] (AIKTC, 2019-05)
    It was observed through research that Natural Fibre Reinforced Polymer Composite have high water absorption capacity. In order to make the commercial use of natural fibres, which are abundantly available at a very less ...
  • Study of water absorption behaviour of natural fibre reinforced polymer composites under various pretreatment conditions of natural fiber 
    Ansari, Zakir; Shaikh, Mohd. Ammar (16DME173); Khan, Zaid Sher (16DME156); Ansari, Mubin (16DME127) (AIKTC, 2019-05)
    It is observed through research that Natural Fibre Reinforced Polymer Composite have high water absorption capacity. In order to make the commercial use of natural fibres, which are abundantly available at a very less ...
  • Fabrication of exoskeleton arm 
    Qureshi, Arshad Khaja; Khan, Ahraz [15DME147]; Khan, Salman [14ME84]; Ansari, Shahroz [14ME66]; Khan, Nabeel [15DME152] (AIKTC, 2019-05)
    This project deals with movement of an arm by the use of an exoskeleton. an exoskeleton is an external structural mechanism with joints and links corresponding to those of the human body.” In other words, designing the ...
  • Study, analysis and design of bolster spring used in ICF railway coaches 
    Hirani, Aslam; Shaikh, Ubaid [15ME107]; Ansari, Kafil [15ME63]; Shaikh, Asif [15ME98] (AIKTC, 2019-05)
    The springs used in the bogie suspension of railway coaches are compression springs. They are made of an elastic wire material formed into the shape of a helix. They are commonly referred to as a coil spring or a helical ...

Search Repository


Advanced Search

Browse

My Account