Recently added

Mechanical Engineering - Project Reports: Recent submissions

  • Improvement of mini CNC 
    Hirani, Aslam; Mukadam, Wasif Ashraf Naseem [16DME162]; Tungekar, Mohd. Rameez Mohd. Moazam [16DME183]; Siddiqui, Sakib Shamshul Haque [16DME181]; Qureshi, Mohd. Siddique Mohd. Saeed [16DME166] (AIKTC, 2019-05)
    CNC machining is a process used in the manufacturing sector that involves the use of computers to control machine tools.The mini cnc is presented by previous batch but due to vibrations and inaccuracy in the performance ...
  • Dual use of vapour compression refrigeraton system (VCRS) 
    Hirani, Aslam; Khan, Rehman Feroz [16DME154]; Momin, Mohammad Imtiaz [16DME161]; Mogal, Usama Zafar [16DME160]; Lore, Ubed Basheer [16DME157] (AIKTC, 2019-05)
    As we all know heat is one of the different forms of energy and to alleviate the problem of protection of global environment saving of energy is very important. Whenever the heat is evolved from any system to the ...
  • Improvisation and fabrication of rake test rig used for air brake leakage testing in railways 
    Shaikh, Rizwan; Shaikh, Mustaq Ibrahim [15ME104]; Raza, Mohd. Nadeem Aslam [15ME93]; Siddiqui, Rameez [15ME113]; Raeen, Saddam Md. Shaukat [15ME91] (AIKTC, 2019-05)
    The air brake is the standard train brake used by railways all over the world, and to test the braking system single car test rig is used. It is based on the simple physical properties of compressed air. The Rake Test ...
  • Design and analysis on effects of different fin perforations on motor 
    Shaikh, Rizwan; Shaikh, Mubashshir Mustaq [16DME175]; Shaikh, Danish Akbar Ali [15ME99]; Shaikh, Fatru Musa [15ME100]; Shaikh, Yusuf Mansoor [16DME172] (AIKTC, 2019-05)
  • Study on effect of blends of datura stramonium bio diesel on the performance and emission characteristics on diesel engine 
    Thavai, Rahul; Shaikh, Md. Noorul [15ME47]; Najmus, Saquib [15ME33]; Hawale, Parag [16DME139]; Khan, Farhan [15ME16] (AIKTC, 2019-05)
    Biodiesel has been emerging as a potential source for the replacement of conventional diesel fuel. Non edible plant oil extracted from the seeds of Datura Stramonium was used as the feedstock and synthesized into biodiesel ...
  • CFD analysis on helical baffles on shell and tube type heat exchanger 
    Thavai, Rahul; Rumane, Abdullah [15ME36]; Shetty, Sanjoth [15ME55]; Singh, Vishal [15ME58]; Gupta, Vipin [16DME138] (AIKTC, 2019-05)
    In present day, shell and tube heat exchanger is the most common type heat exchanger widely used in oil refinery and other large chemical process, because it suits high pressure application. The aim of this work is to ...
  • Universal powerflex 
    Khan, Mohd. Sirazuddin; Shaikh, Mohsin Khalid [16DME174]; Sayed, Mohsin Hussain [15ME96]; Shaikh, Shehzad Ahmed [16DME177] (AIKTC, 2019-05)
    Background: Developing alternative exercise programmes that can alleviate certain barriers to exercise such as psychological, environmental or socio- economical barriers, but provide similar physiological benefits e.g. ...
  • Design and fabrication of food composter 
    Tadavi, Shakil; Bhatkar, Danish Abdul Rauf [16DME132]; Dalvi, Sajjad Mushtaque [16DME136]; Dinware, Ziyad Salim [16DME137]; Khan, Danish Salim [16DME147] (AIKTC, 2019-05)
    Organic waste and especially Food waste is a worldwide problem, it cost to be disposed and nothing is gained from it, on the contrary, it causes the emission of harmful gases such as methane. In India 40 percent of the ...
  • Design and installation of additional control system of side-car scooter and chassis modification for stability improvement 
    Momin, Zia; Biragdar, Hasnain [16DME130]; Khan, Faizur Rehman [16DME149]; Khan, Abdul Ahad [16DME144]; Kazi, Saud [16DME143] (AIKTC, 2019-05)
    According to census made in 2011 there were approximately 5,436,604 patient suffering from movement disability. Our aim is to design and install additional control system of side-car scooter which was designed by previous ...
  • Hydraulic valve machine testing 
    Jamadar, Afaqahmed; Mohite, Aditya Deepak [14ME92]; Chougle, Tabish Anwar [14ME70] (AIKTC, 2019-05)
    An engineer is always focused towards challenges of bringing ideas and concepts to life. Therefore, sophisticated machines and modern techniques have to be constantly developed and implemented for economical manufacturing ...
  • Productivity enhancement using systematic layout planning and monitoring 5S strategis 
    Jamadar, Afaqahmed; Sayyed, Ammar [15ME38]; Mapkar, Sarfaraz [15ME38]; Thakur, Uzair [15ME59]; Belal, Ahmed [15ME07] (AIKTC, 2019-05)
    Small scale industries play an important role in the Indian economy. After agriculture, it has emerged as a powerful tool in providing relatively large employment. The objective of this thesis is to improve the productivity ...
  • Quality improvement through implementation of Kaizen technique at allied engineering 
    Kazi, Javed; Khan, Rahil Raza [15ME22]; Khan, Mujeeb Ahmed [16DME152]; Khan, Faisal Anwar [16DME148]; Khan, Mohd. Arbaz [15ME20] (AIKTC, 2019-05)
    Thousands of small & medium scale industries are present in India. All are facing certain problems resulting in lack of productivity, greater processing time etc. The basis definition of Kaizen philosophy & a brief review ...
  • Implementation of 5S method 
    Kazi, Javed; Ali, Mohammed Afreed [15ME62]; Yadav, Ravi Pratap Sanatan [15ME120]; Sojar, Hussain Alisagar [15ME76]; Siddiquie, Mahefuzur Rehman [15ME115] (AIKTC, 2019-05)
    The main desire of this project is to study remedy the productiveness, efficiency and housekeeping of available resources at Mechmann Engineering Pvt. Ltd. And try to reducing variation and decrease the material waste. ...
  • Implementation of 5S at Malmo Steels Pvt.Ltd. 
    Khan, Jalal; Shaikh, Moeez Mukhtar [16DME171]; Ansari, Shoeb Javed [16DME129]; Sayyed, Mohammed Aarish [16DME169]; Shaikh, Naushad Mohammed Umar [16DME176] (AIKTC, 2019-05)
    5S is a basic foundation of Lean Manufacturing systems. It is a tool for cleaning, sorting, organizing and providing the necessary groundwork for workpiece improvement. This project dealt with the implementation of 5S ...
  • Optimization of plant layout 
    Khan, Jalal; Sayed, Akbar Ali Sadique Ali [16DME168]; Shaikh, Sohail Riyaz [16DME178]; Thange, Yaseen Saleem [16DME182]; Malpekar, Mohseen Mubarak [16DME158] (AIKTC, 2019-05)
    Facilities layout is a systematic and functional arrangement of different departments, machines, equipments and services in a manufacturing industry. It is essential to have a well developed plant layout for all the ...
  • Implementation of 5S on storage room in a pipe fitting industry 
    Shaikh, Saad; Dawre, Ali [15ME03]; Kazi, Natik [15ME12]; Khan, Huzaifa [15ME18]; Ansari, Imran [15ME06] (AIKTC, 2019-05)
    5S is a basc foundation of lean manufacturing systems.The purpose of the case study is to use 5S tool to assist small scale manufacturing organization to become more productive and more efficient. A simple approach has ...
  • Fabrication and automation of Arduino based farm-bot for precision farming 
    Khan, Yusuf; Ansari, Mohd. Danish Anwar Hussain [16DME125]; Chaudhry, Imran Baitullah [16DME134]; Bargir, Shahrukh Abdul Salam [16DME131]; Ansari, Salman Sajid [16DME128] (AIKTC, 2019-05)
    Looking towards the current scenario of our food production system, one can say how broken it is. As a result we are destroying our health as well as our environ-ment.For that we came up with a new paradigm of precision ...
  • Biogas from kitchen waste 
    Shah, Ubaid; Shaikh, Usama Javed (15ME52 ); Sheikh, Mohd. Jaffar (15ME54); Thakur, Viraj S.(15ME60); Yadav, Nitesh Subhash (15ME61) (AIKTC, 2019-05)
    India’s economic growth is contributing to a massive increase in the generation of solid waste. Approximately 55 million tones of Municipal Solid Waste is generated annually by urban areas in India. Over 59 % of homes in ...
  • Water absorption characteristics of natural fibre reinforced polymer composite for various pretreatment of natural fibre 
    Ansari, Zakir; Momin, Osama M.(15ME31 ); Sakarkar, Mansoor I.(15ME27); Shaikh, Siraj Ali J.(15ME51 ); Tungekar, Mohd. Yoosha(14ME58) (AIKTC, 2019-05)
    It was observed through research that Natural Fibre Reinforced Polymer Composite have high water absorption capacity. In order to make the commercial use of natural fibres, which are abundantly available at a very less ...
  • Study of water absorption behaviour of natural fibre reinforced polymer composites under various pretreatment conditions of natural fibre 
    Ansari, Zakir; Shaikh, Md. Ammar (16DME173); Ansari, Mubin (16DME127 ); Khan, Zaid Sher (16DME156) (AIKTC, 2019-05)
    It is observed through research that Natural Fibre Reinforced Polymer Composite have high water absorption capacity. In order to make the commercial use of natural fibres, which are abundantly available at a very less cost, ...

Search Repository


Advanced Search

Browse

My Account