Recently added

Mechanical Engineering - Project Reports: Recent submissions

  • Auto-feed hydraulic machine 
    Meshram, Atul; Shaikh, Arshad (13ME44); Sayyed, Adnan (13ME41); Wasiullah, Nasibullah (13ME62) (AIKTC, 2017-04)
    In industries, the heavy hydraulic cutting machines are used which are so costly and small industries can’t afford it. To reduce its cost we have designed the low cost hydraulic cutting machine by sacrificing the thickness ...
  • Design and optimization of cooling system in locomotives 
    Shaikh, Mohammad Jawed; Momin, Fahim (13ME29); Dalvi, Faisal (14DME127); Siddiqui, Saif (14DME143); Siddiqui, Abdulrauf (14DME142) (AIKTC, 2017-04)
    In today’s competitive era efficiency means a lot therefore to optimize the cooling system we worked on various parameters that will make it more effective and optimum. In WDG-3A Loco Engine the cooling system employed is ...
  • Design and analysis of heat exchanger 
    Thavai, Rahul; Ansari, Mohd. Saif; Chougle, Zuzer; Mishra, Kuldeep (AIKTC, 2017-04)
    To introduce our project title, the first to introduce is the component on which we worked on, i.e. Heat Exchanger. A Heat Exchanger is a device used to transfer heat between one or more fluids. The fluids may be separated ...
  • Standardization of tube expansion system in shell and tube type heat exchanger 
    Kazi, Javed; Singh, Pooja (13ME116); Shaikh, Mohd. Faizaan (13ME102); Samnake, Marij (13ME102); Rawoot, Shuaib (12ME44) (AIKTC, 2017-04)
    In shell and tube type Heat exchanger, tubes are generally expanded inside the shell with help of expander driven from wattage based device. In industries after every shutting down of expansion machine, they need to take ...
  • Ejector based solar air conditioning system 
    Tadavi, Shakil; Nawab, Moeenuddin; Pathan, Faizan; Wadekar, Faisal (AIKTC, 2017-04)
    Energy supply to refrigeration and air-conditioning systems constitutes a significant role in the world. The International Institute of Refrigeration (IIR) has estimated that approximately 15% of all electricity produced ...
  • Design and favrication of attachement made for lathe machine 
    Hirani, Aslam; Naik, Shohin (13ME96); Pathan, Toufik (13ME99); Patil, Vaibhav (13ME100); Lugade, Swarupanand (13ME121) (AIKTC, 2017-04)
    Grinding is an operation which is done on metal workpiece for removal of material and to get fine surface finish. The available grinding setups are not convenient for small scale industries as they consume lots of time in ...
  • Selection of appropriate combination of renewable energy sources for electricity conservation by using analytical hierarchy process (AHP) 
    Ansari, Zakir; Khan, Naimuddin (13ME87); Khan, Abdul Rab (14DME130); Khan, Sahroz (13ME88) (AIKTC, 2017-04)
    It started with review the historical data of energy consumption which can be compiled from the electricity bills. These data are important in order to understand the patterns of energy used and their trend. After obtaining ...
  • Desalination of brackish water by reverse osmosis 
    Ranade, S.V.; Petiwala, Mohd. Afzal (14DME134); Shaikh, Nedab (14DME140); Dharekar, Shehbaz (14DME147) (AIKTC, 2017-04)
    The base RO process starts with raw water (Brackish Water) pumped from the submersible then the water is dosed with chlorine which kills bacteria and other microbes. After that multigrade sand filter comes to process in ...
  • Optimization of plant layout 
    Shaikh, Saad; Mirza, Anees; Shaikh, Asif; Shaikh, Burhanuddin; Shaikh, Faisal (AIKTC, 2017-04)
    The objective of this thesis is to improve the production floor layout of a manufacturing firm using systematic layout planning (SLP) and to evaluate the proposed alternative layouts. This project is conducted at Otoklin ...
  • Car crash analysis and optimization 
    Tadavi, Shakil; Ansari, Azim; Khan, Mohd. Asif; Ansari, Amir; Patel, Akram (AIKTC, 2017-04)
    An automotive bumper is an important member for safety point of view. Bumper with Fascia in front most part, are design such that, after an impact car can sustain without damage to vehicle safety systems. The intention of ...
  • Solar operating heating and cooling system 
    Gandhi, Asif; Rahmani, Sidique (12ME43); Waghoo, Usama (13ME141); Bheri, Khalid (13ME128); Shaikh, Adnan (12ME49) (AIKTC, 2016-05)
    The purpose of this project is been to investigate the possibility of heating and cooling air by connecting Peltier Elements to a PV panel. The idea was initiated by Energiteknik i Teckomatorp AB, a company that provides ...
  • Design, development and fabrication of chassis and suspension for four wheel electric scooter for handicapped for indoor and outdoor use 
    Momin, Zia; Khan, Shahrukh (12ME32); Khan, Salman (12ME31); Khan, Sadique (12ME30) (AIKTC, 2016-05)
    This report aims to model, simulate, perform the static and dynamic analysis and fabrication of four wheel electric scooter chassis consisting of circular pipe and square beams. Modeling, simulation are performed using ...
  • Design and development of density variation mechanism of submarine 
    Hirani, Aslam; Khan, Abdul (12ME26); Bhaiji, Owais (13ME127); Yahu, Tufail (13ME131); Patel, Sahil (13ME142) (AIKTC, 2016-05)
    A submarine is a vehicle which travels underneath the sea surface by varying its buoyancy. They are powered by diesel engines, whose drawbacks to a large extent are now overcome by nuclear reactors. It travel into the ...
  • Design and analysis of bionic leg 
    Tadavi, Shakil; Moulvi, Shabi (12ME36); Fahad, Mohammad (11ME20); Shemle, Uzair (13ME139); Shaikh, Mohd. Ashhad (12ME54) (AIKTC, 2016-05)
    The actuated leg prosthesis comprises a knee member, a socket connector provided over the knee member, an elongated trans-tibial member having a bottom end under which is connected an artificial foot, and a linear actuator. ...
  • Chip formation analysis of titanuim alloy in high speed machining by using refrigerated air as a coolant 
    Jamadar, Afaqahmed; Chaudhary, Mohd. Ismail (12ME09); Adhikari, Ovais (12ME04); Vishwakarma, Rakesh (13ME143); Faisal, Rabbani (12ME42) (AIKTC, 2016-05)
    Cutting fluids are used to improve the machining performance during cutting processes. However, the use of cutting fluids in machining process has caused some problems like high cost, pollution, and hazards to operator’s ...
  • Spherical turning attachment 
    Khan, Yusuf; Sayed, Tahir (12ME46); Siddique, Avesh (13ME138); Shaikh, Mohd. Juner (12ME51); Shaikh, Javed (12ME50) (AIKTC, 2016-05)
    Spherical Turning Attachment: On lathe machine it is not possible to manufacture spherical objects but with the help of spherical turning attachment it can be easily manufacture. Earlier the spherical objects were made ...
  • Design and development of high strength paper bag using non-recycled paper 
    Ansari, Zakir; Thakur, Altmash (13ME140); Shaikh, Mohd. Rafi (12ME52); Sayyed, Arbaz (13ME137); Khan, Mohd. Shaahid (12ME35) (AIKTC, 2016-05)
    The detrimental effects of plastic bags on the environment are well known. It is now appropriate to use alternative materials for manufacturing bags and in packaging industries. While biodegradable plastics research has ...
  • Design and fabrication of automated chiselling machine 
    Kazi, Javed; Sagar, Sable (12ME45); Jankar, Ganesh (12ME20); Dadas, Suraj (12ME11) (AIKTC, 2016-05)
    Nowadays world is focusing into automation in industrial field each and every work of human is reduced by machine. Machining is term use to describe a variety of material removal processes in which cutting tool removes ...
  • Design and fabrication of 3 in 1 transforming wheelchair 
    Meshram, Atul; Yadav, Rohit (12ME69); Khan, Maksud (12ME29); Gupta, Shyamsunder (12ME14); Khan, Javed (12ME28) (AIKTC, 2016-05)
    It is inevitable for any country to have people with disabilities, especially arthritis patients. The most commonly used devices for disabled people are wheelchairs. What’s more, the life quality of disabled people and ...
  • Design of HVAC system for basement of AIKTC 
    Ghazi, Altamash; Ansari, Rizwan Ahmed Iqbal Husain (13ME126); Mukadam, Awez Yaseen (13ME132); Shaikh, Rubel Mohammed Amin (12ME56) (AIKTC, 2016-05)
    HVAC (Heating, Ventilation and Air conditioning) is technology of indoor and vehicular comfort. Its goal is to provide thermal comfort and acceptable indoor quantity of air. This project is to design a HVAC system for ...

Search Repository


Advanced Search

Browse

My Account