Recently added

Mechanical Engineering - Project Reports: Recent submissions

  • Structural design analysis and manufacturing of medical transport UAV 
    Motiwala, Nawaz; Patel, Abdullah Mohammed Sayeed (17ME63); Khan, Farhan Javeduddin (17ME32); Sarguroh, Bilaal Asgar (17ME11); Chaudhary, Naushad Ahmed Abdul Kuddus (17ME12) (AIKTC, 2021-05)
    In order to minimize human contact, less work to be needed; energy saving and rapid delivery; air transport will address most, if not all, of the barriers faced by working with conventional methods of transporting organs ...
  • E-Bike 
    Khan, Mohd. Sirajuddin; Pansare, Aakif Sardarmirza (17ME61); Prajapati, Rahul Jaikishan (17ME66); Shah, Haris Saqlein (17ME83); Sayyed, Mohammed Tahir (17ME80) (AIKTC, 2021-05)
    An e-bike, is a bike which uses rechargeable batteries and travels up to a distance of 25 to 32 km/hr. High powered varieties can travel more than 45 km/hr. The rechargeable batteries used in the e-bike generally supplies ...
  • Solar powered RC car 
    Khan, Jalal; Mansoori, Mohd Osama Iqbal (17ME57); Shaikh, Mubeen Abdul Majid (14ME50); Khan, Salman Jamaluddin (18DME37); Khan, Nagma (18DME20); Shaikh, Zaid (12ME73) (AIKTC, 2021-05)
    Solar energy is a renewable energy which would exist for even billions of years more. In 2015, COP21 known as the 2015 Paris Climate Conference took place in Paris and the cooperation of over 190 countries agreed on climate, ...
  • Design, fabrication & testing of VAWT w/ Wind deflectors 
    Kazi, Javed; Kondkari, Amaan (17ME45); Kondkari, Shoaib (17ME46); Marolikar, Paritosh (17ME53); Ansari, Mohd Zeeshan (17ME56) (AIKTC, 2021-05)
    Design, fabrication and testing of a Vertical Axis Wind Turbine (VAWT) with wind deflectors and solar panel will be the ongoing final year undergraduate project of us. Here main purpose will be enhancing the performance ...
  • Evaluation and elimination of errors in impact testing machine 
    Nafe, Momin; Khan, Asad Gafoor (17ME27); Khan, Mohammed Adnaan Javed (17ME36); Khatri, Mohammed Ali Salim (17ME44); Nakhwa, Mehmood Nasir (17ME59) (AIKTC, 2021-05)
    To determine the confidence of the test results, it is necessary to evaluate the main factors contributing to the uncertainty in Charpy impact measurement. These factors are: the uncertainty of reference force and length ...
  • CNC plasma cutting machine 
    Khan, Yusuf; Khan, Altamash (17ME25); Khan, Faizan Ahmed (17ME31); Khan, Hifzurrehman (17ME38); Khan, Mutassim (17ME40) (AIKTC, 2021-05)
    In the developing stages of all conventional machining processes there is a special and most important type of non-conventional machining has been developed during early years of mechanical era. The most important and ...
  • Fly and crawl copter 
    Hirani, Aslam; Gharade, Ammar (17ME15); Ghongade, Pratik (17ME16); Jalgaokar, Shehzad (17ME19); Kadam, Mayur (17ME21) (AIKTC, 2021-05)
    Originally created by nir meiri and David Zarrouk ,and named as “Flying STAR, a Hybrid Crawling and Flying Sprawl Tuned Robot”. And was presented at “2019 International Conference on Robotics and Automation(ICRA). Flying ...
  • Aerodynamic design, analysis and testing od medical transpor UAV 
    Motiwala, Nawaz; Chougle, Muneeb Mohammed Arshad (17ME14); Khan, Mohd Umar Raees Ahmed (18DME19); Mulla, Mohamed Afaque Anis (18DME27); Mohamed, Afaque Anis (18DME27) (AIKTC, 2021-05)
    In order to minimize human contact, less work to be needed; energy saving and rapid delivery; air transport will address most, if not all, of the barriers faced by working with conventional methods of transporting organs ...
  • Regulated thermoelectric organ storage container for aerial transport 
    Meshram, Atul; Bamne, Saqib Jamil (17ME09); Sayyad, Iltam Ilyas (17ME18); Khan, Faisal Aqil (17ME29); Malik, Ahetesab Ashab (17ME50) (AIKTC, 2021-05)
    Organ transplantation has become one of the important aspects for one's life. Lungs, heart, pancreas, kidneys, liver, and intestine are among the organs that can be transplanted, and face and body transplants have recently ...
  • Automatic hand sanitizer dispenser 
    Khan, Jalal; Aafrith Ali, Noor Mohd (17ME02); Babar, Mrunesh (17ME08); Bankotkar, Sajid (17ME10); Shaikh, Juneid (17ME20) (AIKTC, 2021-05)
    Demand for hand sanitizers has surged since the coronavirus broke out and spread around the world. Hand sanitizers are usually applied by squirting the sanitizer liquid when one presses a pump with one’s hand. This causes ...
  • MR Fluid bicycle suspension system 
    Nafe, Momin; Utekar, Nandita Rajendra (17ME01); Khan, Ashfaq Sirtaj (17ME28); Khan, Mashuk Ebnesaud (17ME34); Khan, Mohd Waseem Mohd Rais (17ME35) (AIKTC, 2021-05)
    Bicycles are an important element of society, and they are becoming more popular in industrialised countries as a result of climate change concerns. Suspension systems come in a variety of configurations on cross-country, ...
  • Autonomous piloted tethered submersible vehicle used for marine intervention incorporated with instantaneous retrieval system 
    Qureshi, Arshad; Shaikh, Mohd. Ismail (16ME78); Shaikh, Basit Hussain (17ME89); Sayyed, Mohd Maaz (17ME81); Reddy, Jai Pratap (17ME72) (AIKTC, 2021-05)
    The 500-word abstract shall highlight the important features of the thesis/dissertation/ project report and shall correspond to the electronic version to be submitted to the Library for inclusion in the website. The Abstract ...
  • Walker+wheelchair+stretcher 
    Hirani, Aslam; Gandhi, Asif; Shaikh, Asadullah (16ME66); Shaikh, Shafiullah (16ME85); Siddiqui, Zulfikar (16ME88); Thapa, Chetman (16ME90) (AIKTC, 2021-05)
    A walker is a walking aid used by people who have difficulty walking around without any support and wheelchair is a mobility device which has wheels on chair mostly used by people who are unable to walk even with the ...
  • 3-D printer on food printing 
    Shah, Ubaid; Satware, Ajaz (16ME61); Shaikh, Mohd Sofiyan (16ME73); Shaikh, Mohd Affan (16ME77); Shaikh, Mohd Moinuddin (16ME79) (AIKTC, 2021-05)
    This study introduces the first generation food printer concept designs and workable prototypes that target to revolutionize customized food fabrication by 3D printing (3DP). Different from robotics based food manufacturing ...
  • Applicability of acoustic waves in extinguishing fire 
    Jamadar, Afaqahmed; Khan, Mohd Murtuza Bilal (16ME48); Ansari, Mohd Rizwan (17ME06); Kamari, Mehlam (17ME22); Kasu, Afan (17ME23) (AIKTC, 2021-05)
    Fire is a series of self-sustaining chemical reactions with varying degrees of light and heat. The visible part of the fire is called flame. Fire occurs when flammable and/or combustible material, combined with an appropriate ...
  • Cane intelligence 
    Shah, Ubaid; Kazi, Irshad (16ME24); Sanadi, Awees (15ME94); Kazi, Zammam (16ME25); Siddique, Zahoor (18DME54) (AIKTC, 2021-05)
    The Cane is a hand-held device that assists blind or visually impaired people to navigate independently. The smart walking stick helps the blind people toperform navigation and to do their work easily and comfortably. ...
  • Design and analysis of static equipment 
    Thavai, Rahul; Shaikh, Mohd Soohaib (15ME103); Shaikh, Abdullah Shadab (15ME97); Deshmukh, Mohammed (14ME12); Mansoori, Yasin (14ME91) (AIKTC, 2021-05)
    The objective of this thesis is to learn and understand how a facility of manufacturing firm use its static equipment. This project is conducted at NILSAN NISHOTECH S.PVT. LTD, KOPARKHAIRNE MIDC where various pressure ...
  • Machinability study of titanium alloy using cryogenic cooling. 
    Jamadar, Afaqahmed; Khan, Abdul Mujammil Aziz (15ME14); Malim, Danish Salim (16ME40); Sayyed, Mohd Abuzar Mohd Athar (14ME44); Shaikh, Vakas Ahmed Mukhtar Ahmed (15ME53) (AIKTC, 2021-05)
    The challenge of modern machining industries, according to this study, is to attain high quality in terms of dimensional precision, surface finish, high production rate, and cost savings while reducing environmental effect. ...
  • Retrofitting of auto-rikshaw 
    Shah, Ubaid; Shaikh, Mohammed Faiz Bakshi (17DME145); Shaikh, Abdul Kadeer Aijaz Ahmed (17DME141); Yadav, Rishikesh Vijay Vimal (17DME151); Shaikh, Mohammed Khalid Mansoor (17DME147) (AIKTC, 2020-05)
    When it comes to vehicles, one thing is sure that the future is electric. Three wheeled auto rickshaws are most popular mode of transport in India and most of the Asian countries. They play a crucial role in the Indian ...
  • Implementation of plant layout using SLP method 
    Ghazi, Altamash; Shaikh, Danish (17DME143); Shaikh, Zafar (17DME150); Shaikh, Abdul Qadir (17DME140); Siddiqui, Ehsan (17DME152) (AIKTC, 2020-05)
    The objective of this thesis is to improve the facility layout of manufacturing firm using Systematic Plant Layout (SPL) or Systematic Layout Planning (SLP) and im- plementation of 5S. This project is conducted at SANCO ...

Search Repository


Advanced Search

Browse

My Account