Recently added

Mechanical Engineering - Project Reports: Recent submissions

  • Proposed design of energy saving in lift 
    Motiwala, Nawaz; Khan, Mohammed Anas (16ME29); Mahuvawala, Murtaza (16ME39); Choudhary, Ashraf (16ME47); Patel, Saad (16ME55) (AIKTC, 2020-05)
    In this modern world, we all are enjoying the gift given to us that is electricity. so, we must use it wisely and efficiently. It is a boon to us in this fast moving lives of ours. We cannot even imagine our life without ...
  • Failure analysis of mechanical seals 
    Momin, Zia; Deshmukh, Soban Aslam Khan (16ME19); Khamkar, Bilal Athar (16ME26); Pathan, Tavit Ayub (17DME135) (AIKTC, 2020-05)
    This report discussesthefinaldraftofthechosentopic,which entitled Failure Analysis in the MechanicalSeal.Sealface crack propagationisoneofthemajorcauseswhichleadtothefailureofthe mechanicalsealthereforeanalysesonthese ...
  • Design and drafting of HVAC system 
    Shaikh, Rizwan; Choudhary, Abdullah (16ME18); Khan, Md Shamim (16ME28); Khan, Aquib (16ME27); Khan, Mohammed Faiz Alam (16ME31) (AIKTC, 2020-05)
    A split system is an air-conditioning or heat pump system that uses refrigerant as the heat exchange fluid and has an evaporator, compressor and condenser as separate components. In most modern commercial application, the ...
  • Design and analysis of controlled fall device for emergency rescue 
    Shaikh, Saad; Alware, Adnan Abdul Hamid (16ME06); Chogle, Zuber Riyaz (16ME17); Metkar, Saif Mohammad Shafi (16ME45); Satarkar, Arman Murad (16ME59) (AIKTC, 2020-05)
    Due to many factors including increase in population, coupled with limited land mass, architects have moved to design structures with minimal footprint, but maximum use. In turn, this has meant the structures have grown ...
  • Analysis of heat exchanger performance using wind tunnel test rig facility 
    Shaikh, Rizwan; Albuquerque, Farhan (16ME05); Ansari, Rehan (16ME12); Chaurasiya, Sunny (16ME15); Nadar, Venkatesh (16ME50) (AIKTC, 2020-05)
    In this study performance evaluation and testing of the heat exchanger (radiator) are done using wind tunnel test rig facility because all internal combustion engines produce heat as a byproduct of combustion of fuel and ...
  • Optimization of mechanical properties of aluminum metal matrix composite using silicon cambride 
    Khan, Jalal; Abdullah, (16ME03); Ansari, Iqbal (16ME07); Ansari, Danish (16ME09); Ansari, Obaidullah (16ME11); Chaudhary, Shahid (16ME14); Khan, Mohd sameer (16ME32); Mahaldar, Safeer (17DME124) (AIKTC, 2020-05)
    The unique combination of properties provided by aluminum and its alloys make aluminum one of the most versatile , economical and attractive metallic material for a broad range of uses – from soft , highly ductile wrapping ...
  • Study of power saving mechanisms in lift 
    Motiwala, Nawaz; Gupta, Geeta (16ME01); Inamdar, Maruf (16ME22); Kazi, Ali Haider (16ME23); Khan, Mohammed Aquib (16ME30) (AIKTC, 2020-05)
    In this modern world, we all are enjoying the gift given to us that is electricity. so, we must use it wisely and efficiently. It is a boon to us in this fast moving lives of ours. We cannot even imagine our life without ...
  • Design and fabrication of organic composition fertilizer 
    Qureshi, Arshad; Sheikh, Mahroz Ajaz (16DME180); Arshi, Anzalan Amjadali (15ME65); Sayyed, Imran (4DME135); Mulla, Ashkan (13ME94) (AIKTC, 2020-05)
    Every day Metropolitan cities generate more and more waste and this is overloading our municipal systems, systematic management of waste is big problem. Composting is known and easy process of organic waste management. It ...
  • Pnuematic compression molding machine 
    Khan, Mohd. Sirajuddin; Shaikh, Arbaaz (15ME111); Karbelkar, Husban (17DME112); Master, Unez (17DME126); Patel, Akbar (17DME134) (AIKTC, 2020-05)
    The development of pneumatically operated compression molding machine for polymer composites. The main aim of fabricating this machine is to prepare the fiber reinforced polymer composite samples for testing purpose. ...
  • Soft door closer 
    Nafe, Momin; Khan, Arif Aliahmed (15ME82); Md. Shahid, Raza (15ME86); Kumar, V. Ranjeet (16ME92); Siddiqui, Hussain (14ME117) (AIKTC, 2020-05)
    A door closer is a mechanical device that closes a door, which is open by push or pull action manually or automatic. The closer available in a market can involve the consideration of a variety of criteria. In addition to ...
  • Semi automatic pipe scraping and cleaning mechanism using compressed air 
    Kazi, Javed; Kadu, Adnan (15ME77); Shaikh, Shabbir; Koya, Irfan (15ME84); Sayed, Ilyas (15ME95) (AIKTC, 2020-05)
    This project on the SEMI AUTOMATIC PIPE SCRAPING AND CLEANING MECHANISM USING COMPRESSED AIR was carried out at the Matunga Railway Carriage Workshop. The purpose of the project is to reduce the workforce in process of ...
  • Design and development of electromagnetic engine 
    Momin, Zia; Ansari, Fuzail Khilafat (13ME11); Syed, Afsar Shah Anwar Shah (18DMET01); Shek, Jamir Shek Rafik (17DME151); Shaikh, Mohammed Irfan Abdul Khalique (17DME146) (AIKTC, 2020-05)
    With the diminishing fossil fuel resources and unabated increase in energy costs and environmental concerns, engines using alternate energy sources such as bio-fuel, solar power, wind power, electric power, stored power, ...
  • Design, fabrication and development on single car test rig used for pneumatic air break testing in railways 
    Karve, Amruta; Meman, Afajal Valeemahamad (12ME34); Siddique, Mohd Mohsin (15ME112); Siddiqui, Tausif Baharuddin (15ME110); Surme, Kashif Khalil (12ME79) (AIKTC, 2020-05)
    Reliability and increased asset utilization has been the focus of railroads, particularly in heavy haul operations. The maintenance principles have shifted from time-based criteria to condition based criteria with periodic ...
  • Thermoacoustic Refrigeration 
    Shaikh, Rizwan; Parbulkar, Sahil Yasin (18DME28)); Bamne, Saeem Shabbir (18DME10); Bagdadi, Abdul-Rehman Mohammed (18DME09); Chilwan, Ziya Anwar Ali (16ME16) (AIKTC, 2021-05)
    Thermoacoustic refrigeration technology is a green alternative for the conventional refrigeration system in vehicles. The former uses environmentally friendly inert gases whereas the latter uses chemical refrigerants that ...
  • Self Balancing Stretcher Bed 
    Ghazi, Altamash; Shaikh, Abdul Rauf Mohammad Ismail (17ME86); Sayed, Jainul Abdin Sartaj Ali (17ME77); Fahad, Sabir Raees (17ME68); Dhokle, Mohammed Ausaf ayub (15ME72) (AIKTC, 2021-05)
    This project presents a development of self-balancing platform mechanism using ATMEGA microcontroller. The platform has been designed using Stabilizing mechanism including Inertial measurement unit (IMU) and two servo, and ...
  • Bird Strike Analysis on an Aircraft Aerofoil 
    Khan, Yusuf; Mahaldar, Affan Khalil (16ME38); Mulla, Sahil Ahmed Shahzad Ali (16ME49); Shaikh, Arsalan Ayub (15ME42); Shaikh, Shakir Ali Mohammed Hussain (15ME50) (AIKTC, 2020-05)
    Bird strikes have long been a significant threat to aviation safety. The first bird strike dated back to September 7, 1905, recorded by the Wright brothers. The United States Air Force reported 13427 bird/wildlife strikes ...
  • 3D Printer Integrated With Emerging Technologies 
    Motiwala, Nawaz; Akhtar, Tauqueer Ehsan (13ME123); Sayed, Umair Jaffar (17ME79); Kazi, Moazzam Mohammed Hanif (18DME14); Khan, Ali Ahmed Jalil Ahmed (18DME16) (AIKTC, 2021-05)
    Industry 4.0 has boosted technological advancements at a very rapid pace and is becoming extremely difficult to keep up with it. 3D Printing, which is also a product of Industry Revolution 4.0 is also gaining rapid momentum ...
  • Design and Fabrication Of Table Top Injection Mouding Machine 
    Shaikh, Mohammad Jawed; ANSARI, MOHD IRFAN MOHD HASHIM (18DME06); KHAN, SUFIYAN HAMIDULLAH (18DME22); DHANSAY, SUFIYAN ABDUL SATTAR (15ME71); KAWCHALI, SALMAN IMTIYAZ (14ME76) (AIKTC, 2021-05)
    Now a day production rate of the industries has been increasing rapidly. All the industries try to achieve the maximum result and try to improve their product qualities and product functions. To improve the quality of the ...
  • Implementation Of 5S At Malmosteels PVT.LTD 
    Khan, Jalal; SHAIKH, MOEEZ MUKHTAR (16DME171); SHAIKH, NAUSHAD MOHAMMED UMAR (16DME176); SAYYED, MOHAMMED AARISH (16DME169); ANSARI, SHOEB JAVED (16DME129) (AIKTC, 2019-05)
    5S is a basic foundation of Lean Manufacturing systems. It is a tool for cleaning, sorting, organizing and providing the necessary groundwork for workpiece improvement. This project dealt with the implementation of 5S ...
  • Multi-evaporative air conditioning system 
    Meshram, Atul; Khan, Faisal (17ME30); Mulla, Mustaquim (17ME58); Khalifa, Hasnain (17ME17); Maknojia, Md Umar (17ME49) (AIKTC, 2021)
    Air conditioning units or the air conditioners are used in everyday life to cool the air around us. They are a very common consumer electronic device. Inside the air conditioner, refrigeration of some special gases takes ...

Search Repository


Advanced Search

Browse

My Account