Recently added

Faculty Publications: Recent submissions

  • Managing Retrofit Project. 
    Shah, Dhaval (International Journal of Recent Advances in Engineering & Technology (IJRAET), 2016-03)
    Many existing reinforced concrete structure in present world are inadequate for earthquakes. Recent earthquakes which occurred during last decades have indicates that major damage occurred was not directly due to ...
  • Powerformer- A Discontinuous Innovation 
    Amin, Shraddha; Hule, Shraddha (International Research Journal of Engineering and Technology (IRJET, 2016-11)
    This paper provides an overview of a technology that offers a direct connection to the power network without a step up transformer. Implementation of powerformer will bring a change in the present scenario of generation. ...
  • Estimation of Discharge Using LS-SVM and Model Trees 
    Magar, Rajendra (Journal of Water Resources and Ocean Science, 2016-11)
    In planning and management of any water resource systems prediction or estimation of runoff over the catchment is considered as a crucial factor. Many researchers over the past two decades addressed these problems by ...
  • Comparative Study of Rice Husk Ash, Metakaolin & Standard Concrete 
    Shah, Dhaval (International Journal of Recent Advances in Engineering & Technology (IJRAET), 2016-04-01)
    This paper summarizes the comparison between properties of Rice Husk Ash (RHA) and Metakaolin when used as partial replacement for Ordinary Portland Cement (OPC) in concrete. OPC was replaced with these mineral admixtures ...
  • Probabale maximum flood at Nira-Deoghar dam site in India 
    Shah, Dhaval; Magar, Rajendra (Sardar Vallabhbhai National Institute of Technology, 2016-10-14)
    Estimation of inflow design flood i.e. Probable maximum flood (PMF) for major storage reservoirs is most important parameter. The consequences of a failure of the structure due to improper estimation of PMF could be ...
  • Extracting Maximum Power from Photovoltaic System using MPPT Techniques 
    Bodhle, Gulrez (International Journal on Recent and Innovation Trends in Computing and Communication, 2016-10)
    In this paper for control of photo-voltaic power by utilization of a boost converter using Maximum Power Point Tracking (MPPT) control mechanism is presented. The MPPT is responsible for extracting the maximum possible ...
  • Automated Attendance System Using Face Recognition 
    Khan, Suhel (11CO25); Khan, Shoeb (11CO24); Zakariya, Md. Hussian (12CO63); Pathan, Nazim (11CO21); Khan, Mubashir; Gopale, Apeksha (International Journal of Innovative Research in Computer and Communication Engineering, 2016-04)
    The objective of this system is to present an automated system for human face recognition for an organization or institute to mark the attendance of their students or employees. This paper introduces face detection method ...
  • Analytic Hierarchy Process (AHP) to Find Most Probable Web Attack on an E-Commerce Site 
    Lokhande, P. S. (ACM: Association For Computing Machinery, 2016-03-04)
    Attackers are using various techniques to attack on an E-Commerce site; they do have various options to initiate attack. On other hand web administrators finding it difficult to prioritize the defense mechanism against ...
  • Use of QR Code and Augmented Reality Application in Libraries 
    Momin, Shaheen (2016-08-27)
    Invited as a Speaker for One Day Workshop on “Use of QR Code and Augmented Reality Application in Libraries" on 27th August 2016 at MIT School of Management, Pune.
  • Kinematic and Dynamic Modeling of a Quadcopter following a trajectory using MATLAB 
    Thavai, Rahul; Shaikh, Altamash(12ME48); Syed, Adnan (12ME62); Padwekar, Aamir(13ME133) (Vishwatmak Om Gurudev College of Engineering, 2016-04-09)
    Our project consists of plotting various outputs of kinematic and dynamic motion with respect to time . This output is obtained by making a quadcopter to trace a pescribed trajectory in the MATLAB ra13 simulation ...
  • Kinematic Modeling of Biped Robot 
    Thavai, Rahul (Pillai HOC College of Engineering and Technology, 2014-02-21)
    In the last decades we have seen a rapid growth in use of Humanoid Robotics, which leads to an autonomous research field. Humanoid robots are used in all situations of human’s everyday life, cooperating with us. They ...
  • Optimization of Cutting parameters for Surface roughness in CNC turning of P20 steel 
    Qureshi, Arshad (International Journal of Scientific & Engineering Research, 2015-12)
    The surface roughness is one of the most commonly used criteria to determine the quality of turned steel. The surface roughness of a turned surface is an important response parameter. The quality of product such ...
  • Literature Review for Design of Elliptical Bicycle 
    Shaikh, Saad; Shaikhnag, Yasser (12ME59); Surangiwala, Mohd. Hawwaad (12ME61); Shaikh, Falak (12ME02); Khan, Saniya (12ME01) (International Journal of Science, Engineering and Technology Research (IJSETR), 2016-01)
    Customization design is a trend for developing a bicycle in recent years. Thus, the comfort of riding a bicycle is an important factor that should be paid much attention to while developing a bicycle. From the ...
  • Review on Six Sigma (DMAIC) Methodology 
    Shaikh, Saad; Kazi, Javed (International Journal Of Modern Engineering Research (IJMER), 2015-02)
    The growth rate of fair-size institutions and Organization is directly related to the implementation of Six Sigma Methodology. This paper consists of detailed analysis regarding application of six sigma Methodologies ...
  • Review of 5S Technique 
    Shaikh, Saad; Ansari, Noor (11ME11); Khan, Naseem (11ME31); Sayyed, Ziaul (11ME49); Sawant, Ishtiyak (11ME47) (International Journal of Science, Engineering and Technology Research (IJSETR), 2015-04)
    There are certain fields which are very demanding in today's trend. Small Scale Industry is one of the field. It plays an important role in Indian country. It has emerged as powerful source in providing relatively ...
  • Implementation of 5S Practices in a Small Scale Organization: A Case Study 
    Shaikh, Saad; Ansari, Noor (11ME11); Sawant, Ishtiyak (11ME47); Sayyed, Ziaul (11ME49); Khan, Naseem (11ME31) (International Journal of Engineering and Management Research, 2015-04)
    A small scale industry plays an important role in Indian economy. In an organization the prime importance is given to the quality and productivity. Since a problem come across due to the defects in materials, ...
  • Literature review on optimization of cutting parameters for surface roughness in turning process 
    Qureshi, Arshad (International Journal of Engineering Research and Development, 2015-05)
    This paper reviews the optimization of cutting parameters for surface roughness in the turning process. Surface roughness is one of the most commonly used criteria to determine quality of a turned surface. The surface ...
  • Preparation of Templates for Underground Utility Mapping Using Ground Penetrating Radar System 
    Jadhav, Umesh (Walchand College of Engineering, 2013-05-31)
    This paper discusses on preparation of templates for underground utility mapping using ground penetrating radar (GPR) system for Indian soil conditions. Ground-penetrating radar has been used for several years as a ...
  • Review On Quantitative feedback Theory (QFT) To Maintain Power System Stabilty. 
    Amin, Shraddha (International Journal of Advances in Science Engineering and Technology, 2014-01)
    There are different practical methods which are used to maintain the power system stability but these systems are characterized by high uncertainty which makes it difficult to maintain good stability. In case of conventional ...
  • Use of Rice Husk Ash in Concrete 
    Syed, Mehdi Abbas (14CEM16); Patil, Dada S. (International Journal of Scientific and Engineering Research, 2015-12)
    This paper summarizes the research work on the properties of Rice Husk Ash (RHA) when used as partial replacement for Ordinary Portland Cement (OPC) in concrete. OPC was replaced with RHA by weight at 5%, 10% and ...

Search Repository


Advanced Search

Browse

My Account