Research - Dept. of Civil Engg.

Research - Dept. of Civil Engg.

 

Recent Submissions

  • Patil, Dada S.; Anadinni, S. B.; Shivapur, A. V. (NBM Media Group Publication, 2022-09)
    Concrete requires suffucient curing to attain the desired strengh as well as durability properties. If the concrete is not cured adequately, cement will not undergo full hyderation.
  • Katrekar, Shweta (16CEM06); Magar, Rajendra; Khan, Afroz (International Advanced Research Journal in Science, Engineering and Technology, 2018-02)
    Uncertainty certainly affects the performance of a construction project. The exact definition of risk and uncertainty is still not known. Everyone has their own perspectives. Though, it is accepted as the ...
  • Mansoori, Raiyan; Pakhmore, Mudassir Zahid; Gawade, Prathamesh P. (International Journal of Recent Advances in Engineering & Technology, 2016)
    Abstract—Good planning ,adequate organizational machinery and sufficient flow of resources are the prerequisites of an efficient project but not without a warning mechanism which will alert the organization about its SWOT ...
  • Pakhmore, Mudassir Zahid; Mansoori, Raiyan; Gawade, Prathamesh P. (International Journal of Recent Advances in Engineering & Technology, 2016)
    Abstract— The Architecture, Engineering & Construction (AEC) industry has a long chase to overcome the barriers of conventional method come from project cost overrun, poor productivity, quality, and extended time. Building ...
  • Gawade, Prathamesh P.; Pakhmore, Mudassir Zahid; Mansoori, Raiyan (International Journal of Engineering Research, 2016-01-09)
    Abstract : There are various draw backs in conventional method used for planning, scheduling & monitoring projects in Architecture, Engineering, and Construction (AEC)industry which fails to provide a clear view of the ...
  • Katrekar, Shweta Sushil (16CEM06); Magar, Rajendra; Khan, Afroz (International Advanced Research Journal in Science, Engineering and Technology, 2018-02)
    Uncertainty certainly affects the performance of a construction project. The exact definition of risk and uncertainty is still not known. Everyone has their own perspectives. Though, it is accepted as the results and ...
  • Shaikh, Mohammed Ayyaz Mohammed Qasim (15CEM13); Magar, Rajendra; Mahajan, Girish (International Advanced Research Journal in Science, Engineering and Technology, 2018-02)
    Three important parameters such as time, cost and quality are essentially necessary for successful completion of construction projects. Quality is the real parameter that is responsible for safety and overall health ...
  • Gavaskar, Pradnya (16CEM05); Magar, Rajendra; Honnutagi, Abdul Razak (International Advanced Research Journal in Science, Engineering and Technology, 2018-02)
    In construction projects, construction project managers monitor and control the project performance to ensure the project is under control. The Earned Value Management (EVM) method is a tool that integrates ...
  • Tiwari, Shivendra (16CEM13); Magar, Rajendra; Honnutagi, Abdul Razak (International Advanced Research Journal in Science, Engineering and Technology, 2018-02-03)
    The estimated cost of construction material on any construction project is about 40-60% of the total construction project cost in which approximately construction material’s waste contributes 30-35% of the material ...
  • Magar, Rajendra; Khan, Afroz Rahat Naeem; Khan, Rahil; Ansari, Shahbaz; Khan, Haroon (Journal of Advance Research Construction and Urban Architecture, 2017)
    Due to environmental concern, the use of supplementary cementitious materials (SCMs) is increasing at a high rate in construction industry. In this study, an experimental investigation has been carried out to assess the ...
  • Magar, Rajendra (Advances in Computational Design, Vol. 2, No. 3 (2017) 225-240., 2017)
    This paper presents the application of multiple linear regression (MLR) and artificial neural network (ANN) techniques for developing the models to predict the unconfined compressive strength (UCS) and Brazilian tensile ...
  • Maralapalle, Vedprakash; Dasgupta, Rohan; Shaikh, Wasim (14CEM14) (International Journal for Science and Advance Research In Technology, 2017-06)
    Abstract-In the piled-raft foundation systems the load is assumed to be shared between the piles and raft. Therefore, this improves the ultimate load capacity and reduces settlements in a very economic way as compared ...
  • Maralapalle, Vedprakash; Dasgupta, Rohan; Shaikh, Wasim (14CEM14) (International Journal for Science and Advance Research In Technology, 2017-06)
    Abstract-In the piled-raft foundation systems the load is assumed to be shared between the piles and raft. Therefore, this improves the ultimate load capacity and reduces settlements in a very economic way as compared with ...
  • Magar, Rajendra; Shukla, Manojkumar (Tech-Chronicle, 2016-09)
    Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. It provides both the government and contractors the ...
  • Magar, Rajendra; Khan, Afroz; Gupta, Vipin (16DME138); Gupta, Vinay; Sayyed, Firoz Khalil (16DCES83) (Journals Pub, 2017-01)
    Nowadays, supplementary cementitious materials (SCMs) are used in concrete because it reduces CO2 emission during. The husks, which are production of cement, reduces cement contents, improve workability, increase strength ...
  • Magar, Rajendra; Shah, Dhaval; Srivastava, Ashish (Shree L.R. Tiwari College of Engineering, Bhayandar, 2017-03)
    The green building concept ensures the minimum wastage in every stage of construction and operation of the new green building resulting in initial higher cost of approximately 16% as compared to the saving in long term ...
  • Honnutagi, Abdul Razak (International Journal of Scientific & Engineering Research, 2017-03)
    Knowledge Management is the key to survival of organizations in such an advanced economy. This paper highlights the importance of Knowledge Management by use of integrating knowledge management into Manufacturing and ...
  • Maralapalle, Vedprakash (International Conference On “Emerging Trends in Technology and it’s Applications”, 2014)
    Events of the last ten years have greatly heightened the awareness of building owners and designers of the threat of terrorist attacks using explosives. Blast loads become important service loads for certain categories ...
  • Maralapalle, Vedprakash (Blue Eyes Intelligence Engineering & Sciences Publication Pvt. Ltd., 2014-07)
    The objective this paper is to discuss effectiveness of FRP jacketing method used to improve the performance of deteriorated structure, this technique successfully applied on the structure. Also Design method, field ...
  • Maralapalle, Vedprakash (Blue Eyes Intelligence Engineering & Sciences Publication Pvt. Ltd., 2014-07)
    The objective this paper is to discuss effectiveness of R.C.C. jacketing method used to improve the performance of deteriorated structure, this technique successfully applied on the structure. Also Design method, field ...

View more