Abstract:
The present day world is witnessing construction of very challenging and difficult civil engineering structures. Researchers all over the world are attempting to develop low density or lightweight concrete by using different admixtures in concrete up to certain proportions. The floating concrete is one of the concrete in which floats on water. Hence we know that the density of water is 1000 kg/cum. we supposed to be create a floating concrete it should have density of concrete lesser than density of water.
This study deals with the development of Floating concrete by using lightweight aggregate (Pumice stone) and Aluminum powder as an air entraining agent. Floating concrete is made by introducing air or gas into concrete slurry, so that when the mix sets and hardens, uniform cellular structure is formed. We mix fine powder of Aluminum to the slurry and it reacts with the calcium hydroxide present in it thus producing hydrogen gas. This hydrogen gas when contained in the slurry mix gives the cellular structure and thus makes the concrete lighter than the conventional concrete. Pumice stone is a lightweight aggregate of low specific gravity. It is a highly porous material with a high water absorption percentage. In this we do not use the conventional aggregate and replace it by the pumice stone. Pumice is the specimen of highly Porous rocks having density approximately 500-600 Kg/m3. Pumice is produced when super-heated, highly pressurized rock is violently ejected from volcano. The unusual foamy configuration of pumice happens because of simultaneous rapid cooling & rapid depressurization. Pumice has an average porosity of 60-80% and initially floats on water.
